Aluminum Handle for Sguee
60,65 A squeegees are very soft; they are usually used to print on ceramic and with glitter inks.
70,75 A squeegees are recommended for printing on glass and on garments.
80,85 A squeegees are used to print with high-speed automatic machines, to print on CDs, credit cards, electronic circuits, small objects, where high precision is required.
SURFACE: if the item you have to print has an rough, non-planar surface, the most suitable squeegee durometer is between 60 and 70 sh. If the surface is smooth, a harder durometer squeegee, between 80 and 90, should be used.
MESH: if a high mesh count (mesh very thin!) is being used, you need a harder squeegee (80 or 90 sh); if you are printing with glitter ink (which has large flakes of shiny, plastic material that have to pass through the mesh) you should use a softer squeegee.
INKS: the more aggressive inks, such as UV inks, cause more damage to the squeegee than a standard water based ink. The harder the material, the more solvent resistant the blade. Therefore, to eliminate swelling and chemical breakdown, use a harder durometer squeegee
INK DEPOSIT: a soft squeegee will deposit a thicker layer of ink than a harder squeegee.
Application Fields
1.screen printing industry.
Use to scrape the screen printing solvent liquid, and make to get the equisite pattern.
2.Photography printing industry
Used in photography printing to dry the photographic paper after it is washed,preventing wrinkles or water sports.
3.Window film,Car vinyl film, Ceramic and Sanitaryware design in ceramic industry.
Use to scrap the thin film sticked on the window, make film very flat.
Or scrape vinyl film, make to achieve bubble free application.
4.Electronic industry
To crape circuit board.
|
|
Aluminum Scraping Handle - Aluminum Handle for Sguee Images
|
